Skip to main content
Start of main content.

Project Planning and Scheduling

General Information

This subject concerns the detailed planning and time management of construction projects. It develops key skills in activity planning and estimating, network development, precedence and arrow diagrams, free and total float calculation, critical path method, risk management, resource allocation and levelling, line of balance, monitoring and control, schedule compression and its impact on productivity. Time management software is used to plan and manage project activities. Practical tutorial activities are used extensively in this subject.

  • Academic unit: Faculty of Society & Design
    Subject code: SSUD12-207
    Subject title: Project Planning and Scheduling
    Subject level: Undergraduate
    Semester/Year: January 2018
    Credit points: 10.000
  • Timetable: https://bond.edu.au/timetable
    Delivery mode: Standard
    Workload items:
    • Computer Lab: x12 (Total hours: 24) - Laboratory
    • Lecture: x12 (Total hours: 12) - Weekly Lecture
    Attendance and learning activities:
  • Prescribed resources:

    Books

    • Uher, T. and Zantis, A. (2011). Programming and Scheduling Techniques. Second, Spon Press

    Others

    • Burke, R. (2013). Project Management Techniques (College Edition). Burke Publishing
    • Harris, P.E. (2007). Planning and scheduling using Microsoft Office Project 2007. Eastwood Harris, Pty Ltd
    After enrolment, students can check the Books and Tools area in iLearn for the full Resource List.
    iLearn@Bond & Email: iLearn@Bond is the online learning environment at Bond University and is used to provide access to subject materials, lecture recordings and detailed subject information regarding the subject curriculum, assessment and timing. Both iLearn and the Student Email facility are used to provide important subject notifications. Additionally, official correspondence from the University will be forwarded to students’ Bond email account and must be monitored by the student.

    To access these services, log on to the Student Portal from the Bond University website as www.bond.edu.au

Academic unit: Faculty of Society & Design
Subject code: SSUD12-207
Subject title: Project Planning and Scheduling
Subject level: Undergraduate
Semester/Year: January 2018
Credit points: 10.000

Enrolment requirements

Requisites:

Pre-requisites:

Co-requisites:

There are no co-requisites

Assumed knowledge:

Assumed knowledge is the minimum level of knowledge of a subject area that students are assumed to have acquired through previous study. It is the responsibility of students to ensure they meet the assumed knowledge expectations of the subject. Students who do not possess this prior knowledge are strongly recommended against enrolling and do so at their own risk. No concessions will be made for students’ lack of prior knowledge.

Restrictions:

Nil

Assurance of learning

Assurance of Learning means that universities take responsibility for creating, monitoring and updating curriculum, teaching and assessment so that students graduate with the knowledge, skills and attributes they need for employability and/or further study.

At Bond University, we carefully develop subject and program outcomes to ensure that student learning in each subject contributes to the whole student experience. Students are encouraged to carefully read and consider subject and program outcomes as combined elements.

Program Learning Outcomes (PLOs)

Program Learning Outcomes provide a broad and measurable set of standards that incorporate a range of knowledge and skills that will be achieved on completion of the program. If you are undertaking this subject as part of a degree program, you should refer to the relevant degree program outcomes and graduate attributes as they relate to this subject.

Find your program

Subject Learning Outcomes (SLOs)

On successful completion of this subject the learner will be able to:

  1. Have the ability to prepare and implement a schedule of activities necessary to manage a project.
  2. Have the ability to implement planning processes to ensure projects are completed on time.
  3. Have an understanding of the relationship between time and other key factors such as cost, quality and risk.
  4. Have knowledge of allocation of resources to projects.
  5. Have knowledge of applying risk management techniques.
  6. Have basic skills in the use time management software to manage projects.

Generative Artificial Intelligence in Assessment

The University acknowledges that Generative Artificial Intelligence (Gen-AI) tools are an important facet of contemporary life. Their use in assessment is considered in line with students’ development of the skills and knowledge which demonstrate learning outcomes and underpin study and career success. Instructions on the use of Gen-AI are given for each assessment task; it is your responsibility to adhere to these instructions.

  • Type Task % Timing* Outcomes assessed
    Paper-based Examination (Closed) Formal Examination (Must score minimum 40% in this assessment component to pass overall subject) 50% Final Examination Period 1,2,3,4,5
    Analysis Time schedule and Risk Analysis (Individual) 40% Week 10 1,2,3,4,5,6
    Activity Group Tutorial Activities (in-class) 10% Ongoing 1,2,3,4,5,6
    • * Assessment timing is indicative of the week that the assessment is due or begins (where conducted over multiple weeks), and is based on the standard University academic calendar
    • C = Students must reach a level of competency to successfully complete this assessment.

    Pass requirement

    50% overall, with a minimum 40% in the examination.

  • Assessment criteria

    High Distinction 85-100 Outstanding or exemplary performance in the following areas: interpretative ability; intellectual initiative in response to questions; mastery of the skills required by the subject, general levels of knowledge and analytic ability or clear thinking.
    Distinction 75-84 Usually awarded to students whose performance goes well beyond the minimum requirements set for tasks required in assessment, and who perform well in most of the above areas.
    Credit 65-74 Usually awarded to students whose performance is considered to go beyond the minimum requirements for work set for assessment. Assessable work is typically characterised by a strong performance in some of the capacities listed above.
    Pass 50-64 Usually awarded to students whose performance meets the requirements set for work provided for assessment.
    Fail 0-49 Usually awarded to students whose performance is not considered to meet the minimum requirements set for particular tasks. The fail grade may be a result of insufficient preparation, of inattention to assignment guidelines or lack of academic ability. A frequent cause of failure is lack of attention to subject or assignment guidelines.

    Quality assurance

    For the purposes of quality assurance, Bond University conducts an evaluation process to measure and document student assessment as evidence of the extent to which program and subject learning outcomes are achieved. Some examples of student work will be retained for potential research and quality auditing purposes only. Any student work used will be treated confidentially and no student grades will be affected.

Type Task % Timing* Outcomes assessed
Paper-based Examination (Closed) Formal Examination (Must score minimum 40% in this assessment component to pass overall subject) 50% Final Examination Period 1,2,3,4,5
Analysis Time schedule and Risk Analysis (Individual) 40% Week 10 1,2,3,4,5,6
Activity Group Tutorial Activities (in-class) 10% Ongoing 1,2,3,4,5,6
  • * Assessment timing is indicative of the week that the assessment is due or begins (where conducted over multiple weeks), and is based on the standard University academic calendar
  • C = Students must reach a level of competency to successfully complete this assessment.

Pass requirement

50% overall, with a minimum 40% in the examination.

Study Information

Submission procedures

Students must check the iLearn@Bond subject site for detailed assessment information and submission procedures.

Policy on late submission and extensions

A late penalty will be applied to all overdue assessment tasks unless an extension is granted by the subject coordinator. The standard penalty will be 10% of the total possible marks for that assessment per day (or part thereof) late with no assessment to be accepted seven days after the due date. Where a student is granted an extension, the penalty of 10% per day late starts from the new due date.

Academic Integrity

University’s Academic Integrity Policy defines plagiarism as the act of misrepresenting as one’s own original work: another’s ideas, interpretations, words, or creative works; and/or one’s own previous ideas, interpretations, words, or creative work without acknowledging that it was used previously (i.e., self-plagiarism). The University considers the act of plagiarising to be a breach of the Student Conduct Code and, therefore, subject to the Discipline Regulations which provide for a range of penalties including the reduction of marks or grades, fines and suspension from the University.

Bond University utilises Originality Reporting software to inform academic integrity.

Feedback on assessment

Feedback on assessment will be provided to students within two weeks of the assessment submission due date, as per the Assessment Policy.

Accessibility and Inclusion Support

If you have a disability, illness, injury or health condition that impacts your capacity to complete studies, exams or assessment tasks, it is important you let us know your special requirements, early in the semester. Students will need to make an application for support and submit it with recent, comprehensive documentation at an appointment with a Disability Officer. Students with a disability are encouraged to contact the Disability Office at the earliest possible time, to meet staff and learn about the services available to meet your specific needs. Please note that late notification or failure to disclose your disability can be to your disadvantage as the University cannot guarantee support under such circumstances.

Additional subject information

Subject curriculum

Approved on: Mar 18, 2017. Edition: 2.2
Last updated: Oct 10, 2022