Skip to main content
Start of main content.

Measurement 2

General Information

Measurement 2 develops greater understanding of measurement principles and practices, especially in commercial and industrial construction. Topics include preliminaries, trade preambles, measurement and billing of quantities for a wide range of trades and more complex building works and services and provide experience in the use of computer software in preparing construction documentation. Bid development and pricing strategies are also investigated in detail.

  • Academic unit: Faculty of Society & Design
    Subject code: SDCM71-310
    Subject title: Measurement 2
    Subject level: Postgraduate
    Semester/Year: May 2018
    Credit points: 10.000
  • Timetable: https://bond.edu.au/timetable
    Delivery mode: Intensive
    Workload items:
    • Seminar: x2 (Total hours: 14) - Seminar 1
    • Seminar: x2 (Total hours: 14) - Seminar 2
    • Seminar: x2 (Total hours: 14) - Seminar 3
    • Personal Study Hours: x12 (Total hours: 78) - Recommended Study Hours
    Attendance and learning activities:
  • Prescribed resources:

    Books

    • The Australian Institute of Quantity Surveyors and Master Builders Australia Limited. (2016). Australian Standard Method of Measurement of Building Works. 6th edition,
    • Marsden, P.K. (1998). Basic Building Measurement,. 2nd, NSW University of New South Wales Press Kensington
    • Best, R., Smith, P. and Doherty, J. (2014). Detailed Building Measurement,. n/a, Sydney AIQS
    After enrolment, students can check the Books and Tools area in iLearn for the full Resource List.
    iLearn@Bond & Email: iLearn@Bond is the online learning environment at Bond University and is used to provide access to subject materials, lecture recordings and detailed subject information regarding the subject curriculum, assessment and timing. Both iLearn and the Student Email facility are used to provide important subject notifications. Additionally, official correspondence from the University will be forwarded to students’ Bond email account and must be monitored by the student.

    To access these services, log on to the Student Portal from the Bond University website as www.bond.edu.au

Academic unit: Faculty of Society & Design
Subject code: SDCM71-310
Subject title: Measurement 2
Subject level: Postgraduate
Semester/Year: May 2018
Credit points: 10.000

Enrolment requirements

Requisites:

Pre-requisites:

Co-requisites:

There are no co-requisites

Assumed knowledge:

Assumed knowledge is the minimum level of knowledge of a subject area that students are assumed to have acquired through previous study. It is the responsibility of students to ensure they meet the assumed knowledge expectations of the subject. Students who do not possess this prior knowledge are strongly recommended against enrolling and do so at their own risk. No concessions will be made for students’ lack of prior knowledge.

Restrictions:

Nil

Assurance of learning

Assurance of Learning means that universities take responsibility for creating, monitoring and updating curriculum, teaching and assessment so that students graduate with the knowledge, skills and attributes they need for employability and/or further study.

At Bond University, we carefully develop subject and program outcomes to ensure that student learning in each subject contributes to the whole student experience. Students are encouraged to carefully read and consider subject and program outcomes as combined elements.

Program Learning Outcomes (PLOs)

Program Learning Outcomes provide a broad and measurable set of standards that incorporate a range of knowledge and skills that will be achieved on completion of the program. If you are undertaking this subject as part of a degree program, you should refer to the relevant degree program outcomes and graduate attributes as they relate to this subject.

Find your program

Subject Learning Outcomes (SLOs)

On successful completion of this subject the learner will be able to:

  1. Build on the measurement skills learnt in Measurement 1 and develop these to cover more complex trades and work items.
  2. Evaluate standard methods of measurement and approaches to measuring building quantities and develop a sound knowledge of the costs and benefits associated with alternative measurement methods.
  3. Develop skills in interpretation of construction documents including drawings and specifications, and standards such as the Australian Standard Method Measurement of Building Works.
  4. Advise clients of the benefits and costs associated with different approaches to building cost control and the documents used in tendering and cost management such as various types of bills of quantities, builders' bills and the like.
  5. Develop an advanced ability to quantify two-dimensional and three-dimensional shapes, given sufficient and yet limited description of the dimensions.

Generative Artificial Intelligence in Assessment

The University acknowledges that Generative Artificial Intelligence (Gen-AI) tools are an important facet of contemporary life. Their use in assessment is considered in line with students’ development of the skills and knowledge which demonstrate learning outcomes and underpin study and career success. Instructions on the use of Gen-AI are given for each assessment task; it is your responsibility to adhere to these instructions.

  • Type Task % Timing* Outcomes assessed
    Computer-Aided Examination (Limited Open)^ End of semester examination 50.00% Final Examination Period 1,2,3,4,5
    Technical Document Assignment 1 25.00% Week 5 1,2,3
    Technical Document Assignment 2 25.00% Week 10 1,2,3
    • ^ Students must pass this assessment to pass the subject
    • * Assessment timing is indicative of the week that the assessment is due or begins (where conducted over multiple weeks), and is based on the standard University academic calendar
    • C = Students must reach a level of competency to successfully complete this assessment.

    Pass requirement

    In order to pass this subject students must not only achieve an aggregate (overall) mark of 50% but they must also achieve a minimum 50% mark in the final exam. Where a student achieves an overall mark of 50 or more but fails the exam a final result of 46F will be recorded.

  • Assessment criteria

    High Distinction 85-100 Outstanding or exemplary performance in the following areas: interpretative ability; intellectual initiative in response to questions; mastery of the skills required by the subject, general levels of knowledge and analytic ability or clear thinking.
    Distinction 75-84 Usually awarded to students whose performance goes well beyond the minimum requirements set for tasks required in assessment, and who perform well in most of the above areas.
    Credit 65-74 Usually awarded to students whose performance is considered to go beyond the minimum requirements for work set for assessment. Assessable work is typically characterised by a strong performance in some of the capacities listed above.
    Pass 50-64 Usually awarded to students whose performance meets the requirements set for work provided for assessment.
    Fail 0-49 Usually awarded to students whose performance is not considered to meet the minimum requirements set for particular tasks. The fail grade may be a result of insufficient preparation, of inattention to assignment guidelines or lack of academic ability. A frequent cause of failure is lack of attention to subject or assignment guidelines.

    Quality assurance

    For the purposes of quality assurance, Bond University conducts an evaluation process to measure and document student assessment as evidence of the extent to which program and subject learning outcomes are achieved. Some examples of student work will be retained for potential research and quality auditing purposes only. Any student work used will be treated confidentially and no student grades will be affected.

Type Task % Timing* Outcomes assessed
Computer-Aided Examination (Limited Open)^ End of semester examination 50.00% Final Examination Period 1,2,3,4,5
Technical Document Assignment 1 25.00% Week 5 1,2,3
Technical Document Assignment 2 25.00% Week 10 1,2,3
  • ^ Students must pass this assessment to pass the subject
  • * Assessment timing is indicative of the week that the assessment is due or begins (where conducted over multiple weeks), and is based on the standard University academic calendar
  • C = Students must reach a level of competency to successfully complete this assessment.

Pass requirement

In order to pass this subject students must not only achieve an aggregate (overall) mark of 50% but they must also achieve a minimum 50% mark in the final exam. Where a student achieves an overall mark of 50 or more but fails the exam a final result of 46F will be recorded.

Study Information

Submission procedures

Students must check the iLearn@Bond subject site for detailed assessment information and submission procedures.

Policy on late submission and extensions

A late penalty will be applied to all overdue assessment tasks unless an extension is granted by the subject coordinator. The standard penalty will be 10% of marks awarded to that assessment per day late with no assessment to be accepted seven days after the due date. Where a student is granted an extension, the penalty of 10% per day late starts from the new due date.

Academic Integrity

University’s Academic Integrity Policy defines plagiarism as the act of misrepresenting as one’s own original work: another’s ideas, interpretations, words, or creative works; and/or one’s own previous ideas, interpretations, words, or creative work without acknowledging that it was used previously (i.e., self-plagiarism). The University considers the act of plagiarising to be a breach of the Student Conduct Code and, therefore, subject to the Discipline Regulations which provide for a range of penalties including the reduction of marks or grades, fines and suspension from the University.

Bond University utilises Originality Reporting software to inform academic integrity.

Feedback on assessment

Feedback on assessment will be provided to students within two weeks of the assessment submission due date, as per the Assessment Policy.

Accessibility and Inclusion Support

If you have a disability, illness, injury or health condition that impacts your capacity to complete studies, exams or assessment tasks, it is important you let us know your special requirements, early in the semester. Students will need to make an application for support and submit it with recent, comprehensive documentation at an appointment with a Disability Officer. Students with a disability are encouraged to contact the Disability Office at the earliest possible time, to meet staff and learn about the services available to meet your specific needs. Please note that late notification or failure to disclose your disability can be to your disadvantage as the University cannot guarantee support under such circumstances.

Additional subject information

students are required to have personal copies of the current edition (6th Edition) of the Australian Standard Method of Measurement (ASMM 6). Copies could be obtained from the Bond University Bookshop or online from the weibsite for the Australian Institute of Quantity Surveyors (www.aiqs.com.au). Students are permitted to use the standard in the examination hall IF THEY CAN KEEP A CLEAN COPY WITH NO SCRIBBLES, MARKS OR HIGHLIGHTS.

Subject curriculum

Approved on: May 14, 2018. Edition: 1.3
Last updated: Oct 10, 2022