General Information
This subject is an introduction to structural engineering design which includes external and internal forces, free body diagrams, static force equilibrium, statically determinate structures and design of steel beams.
-
Details
Academic unit: Faculty of Society & Design: Construction Subject code: SSUD13-311 Subject title: Structural Engineering Subject level: Undergraduate Semester/Year: September 2019 Credit points: 10.000 -
Delivery & attendance
Timetable: https://bond.edu.au/timetable Delivery mode: Standard Workload items: - Lecture: x12 (Total hours: 24) - Weekly Lecture
- Tutorial: x12 (Total hours: 12) - Weekly Tutorial
- Personal Study Hours: x12 (Total hours: 84) - Recommended Study Hours
Attendance and learning activities: Attendance at all sessions (lectures and tutorials) is strongly encouraged. Most sessions build on the work on the previous one. It is difficult to recover if you miss a session. Attendance in lectures and tutorials will be monitored, and could affect the final mark in this subject. The seminars commonly involve interactive activities and discussions to foster and develop a deep understanding of the coursework and these discussions may not be be captured effectively by "lecture capture". It is the responsibility of the student to catch up on content missed through non-attendance and to obtain any materials that were physically handed out during the lectures and seminars from the course educator during consultation hours. -
Resources
Prescribed resources: Books
- Derek Seward (2014). Understanding Structures: Analysis, Materials, Design. 5th Edn, Suffolk Palgrave Macmillian
iLearn@Bond & Email: iLearn@Bond is the online learning environment at Bond University and is used to provide access to subject materials, lecture recordings and detailed subject information regarding the subject curriculum, assessment and timing. Both iLearn and the Student Email facility are used to provide important subject notifications. Additionally, official correspondence from the University will be forwarded to students’ Bond email account and must be monitored by the student. To access these services, log on to the Student Portal from the Bond University website as www.bond.edu.au
| Academic unit: | Faculty of Society & Design: Construction |
|---|---|
| Subject code: | SSUD13-311 |
| Subject title: | Structural Engineering |
| Subject level: | Undergraduate |
| Semester/Year: | September 2019 |
| Credit points: | 10.000 |
| Timetable: | https://bond.edu.au/timetable |
|---|---|
| Delivery mode: | Standard |
| Workload items: |
|
| Attendance and learning activities: | Attendance at all sessions (lectures and tutorials) is strongly encouraged. Most sessions build on the work on the previous one. It is difficult to recover if you miss a session. Attendance in lectures and tutorials will be monitored, and could affect the final mark in this subject. The seminars commonly involve interactive activities and discussions to foster and develop a deep understanding of the coursework and these discussions may not be be captured effectively by "lecture capture". It is the responsibility of the student to catch up on content missed through non-attendance and to obtain any materials that were physically handed out during the lectures and seminars from the course educator during consultation hours. |
| Prescribed resources: | Books
|
|---|---|
| iLearn@Bond & Email: | iLearn@Bond is the online learning environment at Bond University and is used to provide access to subject materials, lecture recordings and detailed subject information regarding the subject curriculum, assessment and timing. Both iLearn and the Student Email facility are used to provide important subject notifications. Additionally, official correspondence from the University will be forwarded to students’ Bond email account and must be monitored by the student. To access these services, log on to the Student Portal from the Bond University website as www.bond.edu.au |
Enrolment requirements
| Requisites: |
Pre-requisites:Co-requisites:There are no co-requisites |
|---|---|
| Assumed knowledge: |
Assumed knowledge is the minimum level of knowledge of a subject area that students are assumed to have acquired through previous study. It is the responsibility of students to ensure they meet the assumed knowledge expectations of the subject. Students who do not possess this prior knowledge are strongly recommended against enrolling and do so at their own risk. No concessions will be made for students’ lack of prior knowledge.
|
| Restrictions: |
Nil |
Assurance of learning
Assurance of Learning means that universities take responsibility for creating, monitoring and updating curriculum, teaching and assessment so that students graduate with the knowledge, skills and attributes they need for employability and/or further study.
At Bond University, we carefully develop subject and program outcomes to ensure that student learning in each subject contributes to the whole student experience. Students are encouraged to carefully read and consider subject and program outcomes as combined elements.
Program Learning Outcomes (PLOs)
Program Learning Outcomes provide a broad and measurable set of standards that incorporate a range of knowledge and skills that will be achieved on completion of the program. If you are undertaking this subject as part of a degree program, you should refer to the relevant degree program outcomes and graduate attributes as they relate to this subject.
Subject Learning Outcomes (SLOs)
On successful completion of this subject the learner will be able to:
- Demonstrate an understanding of structural systems and soil mechanics.
- Appreciate the analysis of loading conditions, force, stress, strain and the laws of statics.
- Understand the importance of standards and codes in structural design using steel and concrete as primary construction materials.
- Recognise, understand and be able to interpret the various forms of communication, including structural drawings and details, used by the structural engineer in building and infrastructure projects.
- Understand the power of modern modelling software tool to learn about structural action, forces and deflection, loads and similar concepts.
Generative Artificial Intelligence in Assessment
The University acknowledges that Generative Artificial Intelligence (Gen-AI) tools are an important facet of contemporary life. Their use in assessment is considered in line with students’ development of the skills and knowledge which demonstrate learning outcomes and underpin study and career success. Instructions on the use of Gen-AI are given for each assessment task; it is your responsibility to adhere to these instructions.
-
Assessment details
Type Task % Timing* Outcomes assessed Paper-based Examination (Closed) Final examination 50% Final Examination Period 1,2,3,4,5 Project Project 1 - Research Assignment 15% Week 4 2 Project Project 2 - Research Assignment 20% Week 8 2,3,4 Project Project 3 - Practical calculations 15% Week 10 3,4,5 - * Assessment timing is indicative of the week that the assessment is due or begins (where conducted over multiple weeks), and is based on the standard University academic calendar
- C = Students must reach a level of competency to successfully complete this assessment.
Pass requirement
Students must achieve a minimum 50% cumulative total across all assessment items to be eligible to pass this subject.
-
Assessment criteria
Assessment criteria
High Distinction 85-100 Outstanding or exemplary performance in the following areas: interpretative ability; intellectual initiative in response to questions; mastery of the skills required by the subject, general levels of knowledge and analytic ability or clear thinking. Distinction 75-84 Usually awarded to students whose performance goes well beyond the minimum requirements set for tasks required in assessment, and who perform well in most of the above areas. Credit 65-74 Usually awarded to students whose performance is considered to go beyond the minimum requirements for work set for assessment. Assessable work is typically characterised by a strong performance in some of the capacities listed above. Pass 50-64 Usually awarded to students whose performance meets the requirements set for work provided for assessment. Fail 0-49 Usually awarded to students whose performance is not considered to meet the minimum requirements set for particular tasks. The fail grade may be a result of insufficient preparation, of inattention to assignment guidelines or lack of academic ability. A frequent cause of failure is lack of attention to subject or assignment guidelines. Quality assurance
For the purposes of quality assurance, Bond University conducts an evaluation process to measure and document student assessment as evidence of the extent to which program and subject learning outcomes are achieved. Some examples of student work will be retained for potential research and quality auditing purposes only. Any student work used will be treated confidentially and no student grades will be affected.
| Type | Task | % | Timing* | Outcomes assessed |
|---|---|---|---|---|
| Paper-based Examination (Closed) | Final examination | 50% | Final Examination Period | 1,2,3,4,5 |
| Project | Project 1 - Research Assignment | 15% | Week 4 | 2 |
| Project | Project 2 - Research Assignment | 20% | Week 8 | 2,3,4 |
| Project | Project 3 - Practical calculations | 15% | Week 10 | 3,4,5 |
- * Assessment timing is indicative of the week that the assessment is due or begins (where conducted over multiple weeks), and is based on the standard University academic calendar
- C = Students must reach a level of competency to successfully complete this assessment.
Pass requirement
Students must achieve a minimum 50% cumulative total across all assessment items to be eligible to pass this subject.
Assessment criteria
| High Distinction | 85-100 | Outstanding or exemplary performance in the following areas: interpretative ability; intellectual initiative in response to questions; mastery of the skills required by the subject, general levels of knowledge and analytic ability or clear thinking. |
|---|---|---|
| Distinction | 75-84 | Usually awarded to students whose performance goes well beyond the minimum requirements set for tasks required in assessment, and who perform well in most of the above areas. |
| Credit | 65-74 | Usually awarded to students whose performance is considered to go beyond the minimum requirements for work set for assessment. Assessable work is typically characterised by a strong performance in some of the capacities listed above. |
| Pass | 50-64 | Usually awarded to students whose performance meets the requirements set for work provided for assessment. |
| Fail | 0-49 | Usually awarded to students whose performance is not considered to meet the minimum requirements set for particular tasks. The fail grade may be a result of insufficient preparation, of inattention to assignment guidelines or lack of academic ability. A frequent cause of failure is lack of attention to subject or assignment guidelines. |
Quality assurance
For the purposes of quality assurance, Bond University conducts an evaluation process to measure and document student assessment as evidence of the extent to which program and subject learning outcomes are achieved. Some examples of student work will be retained for potential research and quality auditing purposes only. Any student work used will be treated confidentially and no student grades will be affected.
Study Information
Submission procedures
Students must check the iLearn@Bond subject site for detailed assessment information and submission procedures.
Policy on late submission and extensions
A late penalty will be applied to all overdue assessment tasks unless an extension is granted by the subject coordinator. The standard penalty will be 10% of marks awarded to that assessment per day late with no assessment to be accepted seven days after the due date. Where a student is granted an extension, the penalty of 10% per day late starts from the new due date.
Academic Integrity
University’s Academic Integrity Policy defines plagiarism as the act of misrepresenting as one’s own original work: another’s ideas, interpretations, words, or creative works; and/or one’s own previous ideas, interpretations, words, or creative work without acknowledging that it was used previously (i.e., self-plagiarism). The University considers the act of plagiarising to be a breach of the Student Conduct Code and, therefore, subject to the Discipline Regulations which provide for a range of penalties including the reduction of marks or grades, fines and suspension from the University.
Bond University utilises Originality Reporting software to inform academic integrity.Feedback on assessment
Feedback on assessment will be provided to students within two weeks of the assessment submission due date, as per the Assessment Policy.
Accessibility and Inclusion Support
If you have a disability, illness, injury or health condition that impacts your capacity to complete studies, exams or assessment tasks, it is important you let us know your special requirements, early in the semester. Students will need to make an application for support and submit it with recent, comprehensive documentation at an appointment with a Disability Officer. Students with a disability are encouraged to contact the Disability Office at the earliest possible time, to meet staff and learn about the services available to meet your specific needs. Please note that late notification or failure to disclose your disability can be to your disadvantage as the University cannot guarantee support under such circumstances.
Additional subject information
Student's will be notified of all assessment grades (except final exam) through the "My Grades" link in iLearn. The final grade for the subject will be accessible through the student portal. Specific marks for the final exam may be obtained by requesting it from the course contact after the final grade has been released.
Subject curriculum
-
Introduction and Aims
This lecture covers an introductory discussion on 'Structures', structural engineering and the aims and objectives of this subject.
-
Forces and Equilibrium
This lecture introduces a lot of fundamental concepts to the understanding of engineering basics including forces, equilibrium equations, support conditions and the idea of stress and strain.
SLOs included
- Demonstrate an understanding of structural systems and soil mechanics.
- Appreciate the analysis of loading conditions, force, stress, strain and the laws of statics.
-
Materials
This topic introduces the primary structural materials that are used in the construction industry. The advantages and disadvantages are outlined and management strategies of material specific issues (e.g. rust) are also discussed.
-
Design Actions
This topic introduces the design actions (loads) imparted on a structure and how these are determined and considered in appropriate load combinations (limit state design).
-
Load types, paths and transfer
This lecture discusses in detail the theoretical basis used in the calculation and application of loads to structures during design. Load types are discussed and presented as well as discussion and understanding of load paths and force transfer through tributary areas.
SLOs included
- Demonstrate an understanding of structural systems and soil mechanics.
- Appreciate the analysis of loading conditions, force, stress, strain and the laws of statics.
- Understand the power of modern modelling software tool to learn about structural action, forces and deflection, loads and similar concepts.
-
Tension and compression members
This lecture introduces the concept of tension and compression members including an introduction and discussion on trusses. This includes both practical and theoretical consideration of truss systems.
SLOs included
- Appreciate the analysis of loading conditions, force, stress, strain and the laws of statics.
- Understand the importance of standards and codes in structural design using steel and concrete as primary construction materials.
-
Beam Action
This lecture covers the concept of bending in structural members. This includes discussions of deflection, bending moment diagrams and shear force diagrams.
-
Stability
This lecture introduces the concept of stability and considers this as a requirement for structures from a local and global perspective.
-
Serviceability and connections
This topic covers the structural principle of 'serviceability', with a focus on vibration and describes the design process for this consideration. Connection details and force types or transfer through connections are also presented.
-
Reinforced concrete
Given the dominance of this material in the construction industry, this topic delves deeper into the technical details and practical applications of this construction material. This includes a discussion of normally reinforces and and pre-stressed concrete. There is also an in depth discussion on the numerous variations of reinforced concrete structural systems. This includes considerations of a range of available options including various suspended in-situ concrete floors, slabs on grade and pre-cast systems.
-
Footings and foundations
This lecture covers the ground conditions related to structures. It considers local ground conditions, possible ground improvements as well as the various footing systems available based on several job/project characteristics.
-
Sustainability considerations for structural engineers
This lecture covers an introduction into the background of sustainability considerations for the built environment with a specific focus on how structural engineers can positively influence outcomes.
SLOs included
- Demonstrate an understanding of structural systems and soil mechanics.
- Understand the importance of standards and codes in structural design using steel and concrete as primary construction materials.