Skip to main content
Start of main content.

Professional Placement Internship - Food Service Management

General Information

The nutrition and dietetics professional placement internship (PPI) program is distributed across five subjects that collectively meet the professional placement accreditation requirements of the Dietitians Association of Australia. The PPI provides a minimum of 24 weeks professional practice in the fields of Individual Case Management (2 x PPIs), Food Service Management (1 x PPI), Community and Public Health Nutrition (1 x PPI) and an elective setting (1 x PPI). In this PPI, students perform Food Service Management (FSM) in settings such as hospitals and aged-care facilities for a minimum 4-week, full-time internship. This is performed under the supervision of an Accredited Practising Dietitian (APD) who is affiliated with and supported by Bond University. On completion of this PPI, students’ attainment of FSM competency is assessed by the Practice Supervisor in conjunction with the Internship Coordinator at Bond University. Final assessment of FSM competency to determine fitness to practice and eligibility to graduate from the Master of Nutrition and Dietetic Practice (MNDP) program will occur in the final year of the MNDP program.

  • Academic unit: Faculty of Health Sciences and Medicine
    Subject code: NUTR71-702
    Subject title: Professional Placement Internship - Food Service Management
    Subject level: Postgraduate
    Semester/Year: May 2019
    Credit points: 10.000
  • Timetable: https://bond.edu.au/timetable
    Delivery mode: Situated
    Workload items:
    • Placement: x6 (Total hours: 180) - Professional Placement
    Attendance and learning activities: Attendance is compulsory and is a part of competence. All work builds on the work of the previous days and weeks. Acceptable grounds for requesting the approval of absences include, but are not limited to, if the Student has: an illness, an accident, a family bereavement/funeral attendance, special religious occasions and representative sporting events at a state, national or international level (in accordance with Bond University policies). Late arrival or early departure from any teaching session without the demonstration of acceptable grounds and supporting documentation will be deemed to be an unplanned absence. Time missed during internships due to employment or personal engagements are not acceptable grounds for absence. Completion of the absence form and provision of supporting documentation (i.e. medical certificate, statutory declaration) should be forwarded to the Internships Coordinator via email. More than one day absence in one PPI requires the full complement of days missed over all PPI’s to be made-up at the end of the placement. Attendance is monitored due to the need for completion of tasks and activities that certify competence within the 24 weeks of internship. Although efforts will be made to liaise with placement sites, alternative placement days may not be available to make up for non-attendance. The following Dietitians Association of Australia National Competency Standards are mapped to this subject – 1.1.1, 1.1.2, 1.1.4, 1.1.5, 1.1.6, 1.1.7, 1.2.1, 1.2.2, 1.2.3, 1.3.1, 1.3.2, 1.3.3, 1.3.5, 1.4.1, 1.4.2, 1.4.3, 1.4.4, 1.5.1, 1.5.2, 1.5.3, 2.1.1, 2.1.2, 2.1.3, 2.1.4, 2.2.1, 2.2.2, 2.2.3, 2.2.4, 2.3.1, 2.3.2, 3.1.1, 3.1.2, 3.1.3, 3.2.1, 3.2.2, 3.2.3, 3.2.4, 4.1.1, 4.1.2, 4.1.3, 4.1.4, 4.1.5, 4.2.1, 4.2.2, 4.2.3, 4.3.1, 4.3.2, 4.3.3, 4.3.4, 4.3.5. The following ACEND core knowledge and competencies are mapped to this subject – KRDN1.1, KRDN1.2, KRDN1.3, CRDN1.1, CRDN1.2, CRDN1.3, CRDN1.4, CRDN1.5, CRDN1.6, KRDN2.1, KRDN2.2, KRDN2.5, KRDN2.6, KRDN2.7, CRDN2.1, CRDN2.2, CRDN2.3, CRDN2.4, CRDN2.5, CRDN2.7, CRDN2.8, CRDN2.10, CRDN2.11, CRDN2.12, KRDN3.3, KRDN3.4, CRDN3.3, CRDN3.4, CRDN3.7, CRDN3.9, CRDN3.10, KRDN4.4, KRDN4.5, KRDN4.6, CRDN4.1, CRDN4.2, CRDN4.3, CRDN4.5, CRDN4.6, CRDN4.7, CRDN4.10.
  • Prescribed resources:

    Books

    • Puckett, Ruby Parker. (2012). Food Service Manual for Health Care Institutions. 4th, Chichester; John Wiley & Sons 593
    After enrolment, students can check the Books and Tools area in iLearn for the full Resource List.
    iLearn@Bond & Email: iLearn@Bond is the online learning environment at Bond University and is used to provide access to subject materials, lecture recordings and detailed subject information regarding the subject curriculum, assessment and timing. Both iLearn and the Student Email facility are used to provide important subject notifications. Additionally, official correspondence from the University will be forwarded to students’ Bond email account and must be monitored by the student.

    To access these services, log on to the Student Portal from the Bond University website as www.bond.edu.au

Academic unit: Faculty of Health Sciences and Medicine
Subject code: NUTR71-702
Subject title: Professional Placement Internship - Food Service Management
Subject level: Postgraduate
Semester/Year: May 2019
Credit points: 10.000

Enrolment requirements

Requisites:

Nil

Assumed knowledge:

Assumed knowledge is the minimum level of knowledge of a subject area that students are assumed to have acquired through previous study. It is the responsibility of students to ensure they meet the assumed knowledge expectations of the subject. Students who do not possess this prior knowledge are strongly recommended against enrolling and do so at their own risk. No concessions will be made for students’ lack of prior knowledge.

Restrictions:

Nil

Assurance of learning

Assurance of Learning means that universities take responsibility for creating, monitoring and updating curriculum, teaching and assessment so that students graduate with the knowledge, skills and attributes they need for employability and/or further study.

At Bond University, we carefully develop subject and program outcomes to ensure that student learning in each subject contributes to the whole student experience. Students are encouraged to carefully read and consider subject and program outcomes as combined elements.

Program Learning Outcomes (PLOs)

Program Learning Outcomes provide a broad and measurable set of standards that incorporate a range of knowledge and skills that will be achieved on completion of the program. If you are undertaking this subject as part of a degree program, you should refer to the relevant degree program outcomes and graduate attributes as they relate to this subject.

Find your program

Subject Learning Outcomes (SLOs)

On successful completion of this subject the learner will be able to:

  1. Assess opportunities to improve nutrition and food standards within a food service institution on general and therapeutic menus where individuals are nutritionally dependent.
  2. Use qualitative and/or quantitative methods to collect and analyse data to identify food service and/or nutrition issues and the potential impact on the dietary intake of individual and groups.
  3. Consider and address the nutritional, personal, cultural, sociological, psychological, socioeconomic needs of individuals and groups and the ordering, preparation, service, availability and distribution of food on food service recommendations and interventions.
  4. Develop plans to provide safe and nutritious foods in a food service institution including consideration of food safety programs and relevant legislation.
  5. Implement activities to support the delivery of a quality nutrition food service compliant with relevant food standards and evaluates outcomes in the context of plans, goals and implementation activities using standard benchmarks and procedures.
  6. Assess and assign priorities for action based on assessment of data and available capacity including a practical timeframe.
  7. Identify, consult and engage stakeholders, partners and key food service personnel to enhance the delivery of nutrition care and evaluate and disseminate results of activities with clear justification.
  8. Ensure nutrition information provided about food, recipe or menu is accurate.
  9. Communicate to effect practice change if required, with consideration of sustainability issues, environmental and economic factors.

Generative Artificial Intelligence in Assessment

The University acknowledges that Generative Artificial Intelligence (Gen-AI) tools are an important facet of contemporary life. Their use in assessment is considered in line with students’ development of the skills and knowledge which demonstrate learning outcomes and underpin study and career success. Instructions on the use of Gen-AI are given for each assessment task; it is your responsibility to adhere to these instructions.

  • Type Task % Timing* Outcomes assessed
    Project§^ A project written report including key products of placement will be submitted at the conclusion of your placement. C Week 1 1,2,3,4,5,6,7,8,9
    *Interview^ Assessment of competency development, understanding of site food service system and applicability of project and outcomes to other settings. C Week 1 1,2,3,4,5,6,7,8,9
    Learning Log^ Students will complete goal-setting and reflection as a component of their professional development under the supervision of their supervisor. Their performance monitoring forms should be submitted after each supervisory meeting. C Progressive 2,3,7,9
    Presentation^ A project industry presentation/stakeholder collaborative discussion will be undertaken in the final two weeks of your placement as negotiated. Complementary resources will also be submitted with your presentation. C In Consultation 2,3,4,5,6,7,8,9
    • ^ Students must pass this assessment to pass the subject
    • § Indicates group/teamwork-based assessment
    • * Assessment timing is indicative of the week that the assessment is due or begins (where conducted over multiple weeks), and is based on the standard University academic calendar
    • C = Students must reach a level of competency to successfully complete this assessment.
  • Assessment criteria

    High Distinction 85-100 Outstanding or exemplary performance in the following areas: interpretative ability; intellectual initiative in response to questions; mastery of the skills required by the subject, general levels of knowledge and analytic ability or clear thinking.
    Distinction 75-84 Usually awarded to students whose performance goes well beyond the minimum requirements set for tasks required in assessment, and who perform well in most of the above areas.
    Credit 65-74 Usually awarded to students whose performance is considered to go beyond the minimum requirements for work set for assessment. Assessable work is typically characterised by a strong performance in some of the capacities listed above.
    Pass 50-64 Usually awarded to students whose performance meets the requirements set for work provided for assessment.
    Fail 0-49 Usually awarded to students whose performance is not considered to meet the minimum requirements set for particular tasks. The fail grade may be a result of insufficient preparation, of inattention to assignment guidelines or lack of academic ability. A frequent cause of failure is lack of attention to subject or assignment guidelines.

    Quality assurance

    For the purposes of quality assurance, Bond University conducts an evaluation process to measure and document student assessment as evidence of the extent to which program and subject learning outcomes are achieved. Some examples of student work will be retained for potential research and quality auditing purposes only. Any student work used will be treated confidentially and no student grades will be affected.

Type Task % Timing* Outcomes assessed
Project§^ A project written report including key products of placement will be submitted at the conclusion of your placement. C Week 1 1,2,3,4,5,6,7,8,9
*Interview^ Assessment of competency development, understanding of site food service system and applicability of project and outcomes to other settings. C Week 1 1,2,3,4,5,6,7,8,9
Learning Log^ Students will complete goal-setting and reflection as a component of their professional development under the supervision of their supervisor. Their performance monitoring forms should be submitted after each supervisory meeting. C Progressive 2,3,7,9
Presentation^ A project industry presentation/stakeholder collaborative discussion will be undertaken in the final two weeks of your placement as negotiated. Complementary resources will also be submitted with your presentation. C In Consultation 2,3,4,5,6,7,8,9
  • ^ Students must pass this assessment to pass the subject
  • § Indicates group/teamwork-based assessment
  • * Assessment timing is indicative of the week that the assessment is due or begins (where conducted over multiple weeks), and is based on the standard University academic calendar
  • C = Students must reach a level of competency to successfully complete this assessment.

Study Information

Submission procedures

Students must check the iLearn@Bond subject site for detailed assessment information and submission procedures.

Policy on late submission and extensions

A late penalty will be applied to all overdue assessment tasks unless an extension is granted by the subject coordinator. The standard penalty will be 10% of marks awarded to that assessment per day late with no assessment to be accepted seven days after the due date. Where a student is granted an extension, the penalty of 10% per day late starts from the new due date.

Academic Integrity

University’s Academic Integrity Policy defines plagiarism as the act of misrepresenting as one’s own original work: another’s ideas, interpretations, words, or creative works; and/or one’s own previous ideas, interpretations, words, or creative work without acknowledging that it was used previously (i.e., self-plagiarism). The University considers the act of plagiarising to be a breach of the Student Conduct Code and, therefore, subject to the Discipline Regulations which provide for a range of penalties including the reduction of marks or grades, fines and suspension from the University.

Bond University utilises Originality Reporting software to inform academic integrity.

Feedback on assessment

Feedback on assessment will be provided to students within two weeks of the assessment submission due date, as per the Assessment Policy.

Accessibility and Inclusion Support

If you have a disability, illness, injury or health condition that impacts your capacity to complete studies, exams or assessment tasks, it is important you let us know your special requirements, early in the semester. Students will need to make an application for support and submit it with recent, comprehensive documentation at an appointment with a Disability Officer. Students with a disability are encouraged to contact the Disability Office at the earliest possible time, to meet staff and learn about the services available to meet your specific needs. Please note that late notification or failure to disclose your disability can be to your disadvantage as the University cannot guarantee support under such circumstances.

Additional subject information

Extra costs associated with all PPI subject costs include compliance costs and travel costs as applicable.

Subject curriculum

Approved on: Mar 15, 2019. Edition: 2.5
Last updated: Nov 16, 2022