You are viewing this page as a domestic student.
Change to International

You are a domestic student if you are an Australian citizen, a New Zealand citizen or the holder of an Australian permanent visa.

You are an international student whether you are within or outside Australia and you do not meet the domestic student criteria.

Coronavirus (COVID-19): advice and support for the Bond community. Read more

SSUD71-313: Commercial Construction and Engineering May 2020 [Standard]

General information

Commercial Construction and Engineering builds on the knowledge gained in Understanding Buildings and Structures & Materials. The environment and constraints impacting on a building construction project are analysed. Construction processes and materials common to many types of commercial building projects are examined. Processes for several ‘trades’ are discussed as well as construction techniques for major components such as foundations and basements, concrete shafts and suspended floors. A range of major plant and equipment is reviewed and other key site management issues considered. 

Details

Academic unit:Faculty of Society & Design
Subject code:SSUD71-313
Subject title:Commercial Construction and Engineering
Subject level:Postgraduate
Semester/Year:May 2020
Credit points:10

Delivery & attendance

Timetable: https://bond.edu.au/timetable
Delivery mode:

Standard

Workload items:
  • Lecture: x12 (Total hours: 18) - Weekly lecture
  • Seminar: x12 (Total hours: 18) - Weekly seminar
  • Personal Study Hours: x12 (Total hours: 84) - Recommended study hours
Attendance and learning activities: As successful completion of this subject is heavily dependent on participation during all scheduled sessions, attendance will be monitored. Most sessions build on the content of the previous one. It is difficult for a student to recover if a session is missed. It is the responsibility of the student to catch up on any content missed and to complete set work outside class. It is also necessary for students to engage proactively and contribute positively in discussions, analyses and case studies. The assessments are an important part of developing the knowledge and understanding required to fulfil the minimum requirements of this subject. In addition to ‘remote’ face-to-face contact time, students should plan to spend a minimum of 84 hours undertaking preparation/out of class work/personal study for this subject. This is intended as a general guide only for workload planning. More time may be required depending on the student's comprehension of the content delivered in class and aptitude for the subject. Please note that subsequent subjects assume the student has a full understanding of this subject - this content will not be repeated.

Resources

Prescribed resources: No Prescribed resources. After enrolment, students can check the Books and Tools area in iLearn for the full Resource List.
[email protected] & Email:[email protected] is the online learning environment at Bond University and is used to provide access to subject materials, lecture recordings and detailed subject information regarding the subject curriculum, assessment and timing. Both iLearn and the Student Email facility are used to provide important subject notifications. Additionally, official correspondence from the University will be forwarded to students’ Bond email account and must be monitored by the student.

To access these services, log on to the Student Portal from the Bond University website as www.bond.edu.au

Enrolment requirements

Requisites: ?

Nil

Restrictions: ?

Nil

Assurance of learning

Assurance of Learning means that universities take responsibility for creating, monitoring and updating curriculum, teaching and assessment so that students graduate with the knowledge, skills and attributes they need for employability and/or further study.

At Bond University, we carefully develop subject and program outcomes to ensure that student learning in each subject contributes to the whole student experience. Students are encouraged to carefully read and consider subject and program outcomes as combined elements.

Program Learning Outcomes (PLOs)

Program Learning Outcomes provide a broad and measurable set of standards that incorporate a range of knowledge and skills that will be achieved on completion of the program. If you are undertaking this subject as part of a degree program, you should refer to the relevant degree program outcomes and graduate attributes as they relate to this subject.

Find your program

Subject Learning Outcomes (SLOs)

On successful completion of this subject the learner will be able to:
  1. Understand and describe basic construction and structural principles and practice in the design and construction of medium and high rise commercial construction projects.
  2. Evaluate alternative construction systems and communicate construction solutions by means of sketches and drawings.
  3. Assess temporary works and the suitability of plant and equipment for various construction methods.
  4. Understand and interpret structural drawings and be conversant with engineering terminology.

Assessment

Assessment details

TypeTask%Timing*Outcomes assessed
Mixed Media Assignment Assignment - Preparation of Powerpoint Presentation - working in teams, plus live presentation and answering questions about the presentation. 50% Week 7 1, 4.
Take-home Examination Timed take-home exam 50% Week 12 1, 2, 3, 4.

Pass requirement

Students must achieve a minimum 50% cumulative total for all assessment items to be eligible to pass this subject.

  • * Assessment timing is indicative of the week that the assessment is due or begins (where conducted over multiple weeks), and is based on the standard University academic calendar
  • C = Students must reach a level of competency to successfully complete this assessment.

Assessment criteria

High Distinction 85-100 Outstanding or exemplary performance in the following areas: interpretative ability; intellectual initiative in response to questions; mastery of the skills required by the subject, general levels of knowledge and analytic ability or clear thinking.
Distinction 75-84 Usually awarded to students whose performance goes well beyond the minimum requirements set for tasks required in assessment, and who perform well in most of the above areas.
Credit 65-74 Usually awarded to students whose performance is considered to go beyond the minimum requirements for work set for assessment. Assessable work is typically characterised by a strong performance in some of the capacities listed above.
Pass 50-64 Usually awarded to students whose performance meets the requirements set for work provided for assessment.
Fail 0-49 Usually awarded to students whose performance is not considered to meet the minimum requirements set for particular tasks. The fail grade may be a result of insufficient preparation, of inattention to assignment guidelines or lack of academic ability. A frequent cause of failure is lack of attention to subject or assignment guidelines.

Quality assurance

For the purposes of quality assurance, Bond University conducts an evaluation process to measure and document student assessment as evidence of the extent to which program and subject learning outcomes are achieved. Some examples of student work will be retained for potential research and quality auditing purposes only. Any student work used will be treated confidentially and no student grades will be affected.

Study information

Submission procedures

Students must check the [email protected] subject site for detailed assessment information and submission procedures.

Policy on late submission and extensions

A late penalty will be applied to all overdue assessment tasks unless an extension is granted by the subject coordinator. The standard penalty will be 10% of marks awarded to that assessment per day late with no assessment to be accepted seven days after the due date. Where a student is granted an extension, the penalty of 10% per day late starts from the new due date.

Policy on plagiarism

University’s Academic Integrity Policy defines plagiarism as the act of misrepresenting as one’s own original work: another’s ideas, interpretations, words, or creative works; and/or one’s own previous ideas, interpretations, words, or creative work without acknowledging that it was used previously (i.e., self-plagiarism). The University considers the act of plagiarising to be a breach of the Student Conduct Code and, therefore, subject to the Discipline Regulations which provide for a range of penalties including the reduction of marks or grades, fines and suspension from the University.

Bond University utilises Originality Reporting software to inform academic integrity.

Feedback on assessment

Feedback on assessment will be provided to students within two weeks of the assessment submission due date, as per the Assessment Policy.

Disability support

If you have a disability, illness, injury or health condition that impacts your capacity to complete studies, exams or assessment tasks, it is important you let us know your special requirements, early in the semester. Students will need to make an application for support and submit it with recent, comprehensive documentation at an appointment with a Disability Officer. Students with a disability are encouraged to contact the Disability Office at the earliest possible time, to meet staff and learn about the services available to meet your specific needs. Please note that late notification or failure to disclose your disability can be to your disadvantage as the University cannot guarantee support under such circumstances.

Additional subject information

Students will be notified of all assessment grades (except final exam) through the "My Grades" link in iLearn.

Subject curriculum

The construction environment

Underground services

Concrete construction basics

Foundations and basements

Suspended concrete floors

Construction plant & equipment

Structural steelwork basics

Exterior walls

Ceilings and partitions

Services installation

Internal finishes, fixtures & fittings

Exterior building finishes and external works

Construction site management

Approved on: Apr 30, 2020. Edition: 3.0