This subject addresses the importance of using BIM/Lean/IPD principles and digital transformation to maximise value in all aspects of design and project delivery of complex projects. The strategic management of digital information using 3D BIM models, digital tools and Lean/IPD principles to collaboratively collect, analyse and communicate data is the driving force for future delivery of major complex projects with multiple stakeholders. The subject extends the discussion and practical applications of BIM best practice with decision-making processes based on robust, accessible data-driven information from digital design concept to operation of a building over its lifespan. This subject involves a critical review of using BIM principles and processes integrated with Lean/IPD based practices. The underlying focus of the subject ties all concepts back to information management delivering value not only to the contractor but to the ultimate client.
The subject is taught in a highly interactive environment. The lectures cover a range of topics relating to the opportunities and methods employed by contractors to leverage BIM during construction.
|Academic unit:||Faculty of Society & Design|
|Subject title:||Managing Complexity in Construction (Maximising Value)|
Delivery & attendance
|Attendance and learning activities:||As successful completion of this subject is heavily dependent on participation during all scheduled sessions, attendance will be monitored. Most sessions build on the content of the previous one. It is difficult for a student to recover if a session is missed. It is the responsibility of the student to catch up on any content missed and to complete set work outside class. It is also necessary for students to engage proactively and contribute positively in discussions, analyses and case studies. The assessments are an important part of developing the knowledge and understanding required to fulfil the minimum requirements of this subject. In addition to ‘remote’ face-to-face contact time, students should plan to spend a minimum of 84 hours undertaking preparation/out of class work/personal study for this subject. This is intended as a general guide only for workload planning. More time may be required depending on the student's comprehension of the content delivered in class and aptitude for the subject. Please note that subsequent subjects assume the student has a full understanding of this subject - this content will not be repeated.|
|Prescribed resources:||No Prescribed resources. After enrolment, students can check the Books and Tools area in iLearn for the full Resource List.|
|[email protected] & Email:||[email protected] is the online learning environment at Bond University and is used to provide access to subject materials, lecture recordings and detailed subject information regarding the subject curriculum, assessment and timing. Both iLearn and the Student Email facility are used to provide important subject notifications. Additionally, official correspondence from the University will be forwarded to students’ Bond email account and must be monitored by the student.|
To access these services, log on to the Student Portal from the Bond University website as www.bond.edu.au
|Restrictions: ?|| This subject is not available to|
This subject is not available as a general elective. To be eligible for enrolment, the subject must be specified in the students’ program structure.
Assurance of learning
Assurance of Learning means that universities take responsibility for creating, monitoring and updating curriculum, teaching and assessment so that students graduate with the knowledge, skills and attributes they need for employability and/or further study.
At Bond University, we carefully develop subject and program outcomes to ensure that student learning in each subject contributes to the whole student experience. Students are encouraged to carefully read and consider subject and program outcomes as combined elements.
Program Learning Outcomes (PLOs)
Program Learning Outcomes provide a broad and measurable set of standards that incorporate a range of knowledge and skills that will be achieved on completion of the program. If you are undertaking this subject as part of a degree program, you should refer to the relevant degree program outcomes and graduate attributes as they relate to this subject.
Subject Learning Outcomes (SLOs)
On successful completion of this subject the learner will be able to:
- Evaluate BIM/Lean/IPD technology outputs to make decisions regarding manufacturing aspects of the delivery process that could contribute to minimisation of project waste.
- Assess potential construction delivery intentions using BIM platforms with a Lean construction focus within an IPD approach to determine the best combination and integration of on-site production and off site fabrication to minimize waste on projects.
- Synthesise various aspects of the 7 and 8 component models (depending on model source) for minimizing waste on projects with particular emphasis on - Minimising defects, Reducing unnecessary over production, Elimination of waiting time for materials delivery and other elements of construction process, Ensuring that human resources are employed and applied to optimally utilize their talents, Manage transport and inventory storage logistics to minimise waste, Reduce excessive and unnecessary processing and minimise non-essential motion around sites.
|*In-Class Quiz - Individual||Online examination with multiple attempts allowable||50%||To Be Negotiated||1, 2, 3.|
|Oral Pitch||Team contribution and presentation||30%||Class stream dependent||1, 2, 3.|
|Presentation||Personal demonstration of knowledge||20%||Class stream dependent||1, 2, 3.|
- * Assessment timing is indicative of the week that the assessment is due or begins (where conducted over multiple weeks), and is based on the standard University academic calendar
- C = Students must reach a level of competency to successfully complete this assessment.
|High Distinction||85-100||Outstanding or exemplary performance in the following areas: interpretative ability; intellectual initiative in response to questions; mastery of the skills required by the subject, general levels of knowledge and analytic ability or clear thinking.|
|Distinction||75-84||Usually awarded to students whose performance goes well beyond the minimum requirements set for tasks required in assessment, and who perform well in most of the above areas.|
|Credit||65-74||Usually awarded to students whose performance is considered to go beyond the minimum requirements for work set for assessment. Assessable work is typically characterised by a strong performance in some of the capacities listed above.|
|Pass||50-64||Usually awarded to students whose performance meets the requirements set for work provided for assessment.|
|Fail||0-49||Usually awarded to students whose performance is not considered to meet the minimum requirements set for particular tasks. The fail grade may be a result of insufficient preparation, of inattention to assignment guidelines or lack of academic ability. A frequent cause of failure is lack of attention to subject or assignment guidelines.|
For the purposes of quality assurance, Bond University conducts an evaluation process to measure and document student assessment as evidence of the extent to which program and subject learning outcomes are achieved. Some examples of student work will be retained for potential research and quality auditing purposes only. Any student work used will be treated confidentially and no student grades will be affected.
Students must check the [email protected] subject site for detailed assessment information and submission procedures.
Policy on late submission and extensions
A late penalty will be applied to all overdue assessment tasks unless an extension is granted by the subject coordinator. The standard penalty will be 10% of marks awarded to that assessment per day late with no assessment to be accepted seven days after the due date. Where a student is granted an extension, the penalty of 10% per day late starts from the new due date.
Policy on plagiarism
The University’s Academic Integrity Policy defines plagiarism as the act of misrepresenting as one’s own original work: another’s ideas, interpretations, words, or creative works; and/or one’s own previous ideas, interpretations, words, or creative work without acknowledging that it was used previously (i.e., self-plagiarism). The University considers the act of plagiarising to be a breach of the Student Conduct Code and, therefore, subject to the Discipline Regulations which provide for a range of penalties including the reduction of marks or grades, fines and suspension from the University.
Feedback on assessment
Feedback on assessment will be provided to students within two weeks of the assessment submission due date, as per the Assessment Policy.
If you have a disability, illness, injury or health condition that impacts your capacity to complete studies, exams or assessment tasks, it is important you let us know your special requirements, early in the semester. Students will need to make an application for support and submit it with recent, comprehensive documentation at an appointment with a Disability Officer. Students with a disability are encouraged to contact the Disability Office at the earliest possible time, to meet staff and learn about the services available to meet your specific needs. Please note that late notification or failure to disclose your disability can be to your disadvantage as the University cannot guarantee support under such circumstances.
Review the required BIM skills for contractors, as per the ACIF APCC BIM Knowledge and Skills Framework Understanding the effort of gathering and populating information during late design through construction, versus the value it adds for the contractor/client
The purpose of BIM on the project and interpreting the client's expectations Overview of different BIM documents (as per ISO 19650) and how they affect contractors
Understanding how BIM impacts delivery management, scope definition and HR considerations The importance of digital infrastructure, information mapping, and communicating scope and workflows
Planning model development and minimising model risk. The importance of clearly defining scope. The importance of model setup, monitoring, validating and reporting
Reducing energy, material and labour waste through BIM, Lean and IPD Site logistics including programming and safety opportunities
Recent and upcoming changes to our local industry