You are viewing this page as a domestic student.
Change to International

You are a domestic student if you are an Australian citizen, a New Zealand citizen or the holder of an Australian permanent visa.

You are an international student whether you are within or outside Australia and you do not meet the domestic student criteria.

Coronavirus (COVID-19): advice and support for the Bond community. Read more

SDCM71-313: Integrated Measurement and Professional Practice May 2021 [Standard - .]

General information

This subject develops a mature understanding of the management of the processes associated with the production of contract documents, particularly those that are integrated with cost management. There is an emphasis on emerging and innovative technologies and techniques such as complex building measurement with a range of information management tools. Strong links are developed with the construction industry through guest lectures and case studies of projects presented by industry professionals. Related aspects of professional practice are explored. Estimating from the contractor’s perspective is introduced and fundamental principles are explained and applied.

Details

Academic unit:Faculty of Society & Design
Subject code:SDCM71-313
Subject title:Integrated Measurement and Professional Practice
Subject level:Postgraduate
Semester/Year:May 2021
Credit points:10

Delivery & attendance

Timetable: https://bond.edu.au/timetable
Delivery mode:

Standard

Workload items:
  • Lecture: x12 (Total hours: 18) - Weekly lecture
  • Seminar: x12 (Total hours: 18) - Weekly seminar
  • Personal Study Hours: x12 (Total hours: 84) - Recommended study hours
Attendance and learning activities: As successful completion of this subject is heavily dependent on participation during all scheduled sessions, attendance will be monitored. Most sessions build on the content of the previous one. It is difficult for a student to recover if a session is missed. It is the responsibility of the student to catch up on any content missed and to complete set work outside class. It is also necessary for students to engage proactively and contribute positively in discussions, analyses and case studies. The assessments are an important part of developing the knowledge and understanding required to fulfil the minimum requirements of this subject. In addition to ‘remote’ face-to-face contact time, students should plan to spend a minimum of 84 hours undertaking preparation/out of class work/personal study for this subject. This is intended as a general guide only for workload planning. More time may be required depending on the student's comprehension of the content delivered in class and aptitude for the subject. Please note that subsequent subjects assume the student has a full understanding of this subject - this content will not be repeated.

Resources

Prescribed resources:
  • Institute of Quantity Surveyors of Australia (2018). Australian and New Zealand Standard Method of Measurement of Building Works 2018 Edition.
After enrolment, students can check the Books and Tools area in iLearn for the full Resource List.
[email protected] & Email:[email protected] is the online learning environment at Bond University and is used to provide access to subject materials, lecture recordings and detailed subject information regarding the subject curriculum, assessment and timing. Both iLearn and the Student Email facility are used to provide important subject notifications. Additionally, official correspondence from the University will be forwarded to students’ Bond email account and must be monitored by the student.

To access these services, log on to the Student Portal from the Bond University website as www.bond.edu.au

Enrolment requirements

Requisites: ?

Pre-requisites: ?

Co-requisites: ?

There are no co-requisites.

Restrictions: ?

Nil

Assurance of learning

Assurance of Learning means that universities take responsibility for creating, monitoring and updating curriculum, teaching and assessment so that students graduate with the knowledge, skills and attributes they need for employability and/or further study.

At Bond University, we carefully develop subject and program outcomes to ensure that student learning in each subject contributes to the whole student experience. Students are encouraged to carefully read and consider subject and program outcomes as combined elements.

Program Learning Outcomes (PLOs)

Program Learning Outcomes provide a broad and measurable set of standards that incorporate a range of knowledge and skills that will be achieved on completion of the program. If you are undertaking this subject as part of a degree program, you should refer to the relevant degree program outcomes and graduate attributes as they relate to this subject.

Find your program

Subject Learning Outcomes (SLOs)

On successful completion of this subject the learner will be able to:
  1. Apply the principles of measurement and estimating to more complex building measurement using digital technologies and tools.
  2. Analyse and critically evaluate industry methods and practices associated with the production and use of contract documentation and discuss these in the context of established and emerging professional practice.
  3. Apply general principles to the measurement of building quantities for varying purposes such as the preparation of builder's bills.
  4. Price typical work items and demonstrate a good understanding of the components of construction costs.
  5. Reflect on one's own learning experience and use that reflection to identify areas of knowledge, skill and practice personally considered important for the enhancement of one's career prospects and professional performance.
  6. Provide preliminary advice to clients on the adoption of new management technologies and tools in the process of building procurement.

Assessment

Assessment details

TypeTask%Timing*Outcomes assessed
Analysis Practical on-line task 15% Week 6 2, 5, 6.
Technical Document § Prepare BQ's and price work items using Industry software and three SMM's, together with written report. 35% Week 10 1, 2, 3, 4, 6.
Blog On-line Blog 10% Week 11 2, 5, 6.
Take-home Examination Take home exam 40% Final Examination Period 2, 3, 4, 5.
  • § Indicates group/teamwork-based assessment
  • * Assessment timing is indicative of the week that the assessment is due or begins (where conducted over multiple weeks), and is based on the standard University academic calendar
  • C = Students must reach a level of competency to successfully complete this assessment.

Assessment criteria

High Distinction 85-100 Outstanding or exemplary performance in the following areas: interpretative ability; intellectual initiative in response to questions; mastery of the skills required by the subject, general levels of knowledge and analytic ability or clear thinking.
Distinction 75-84 Usually awarded to students whose performance goes well beyond the minimum requirements set for tasks required in assessment, and who perform well in most of the above areas.
Credit 65-74 Usually awarded to students whose performance is considered to go beyond the minimum requirements for work set for assessment. Assessable work is typically characterised by a strong performance in some of the capacities listed above.
Pass 50-64 Usually awarded to students whose performance meets the requirements set for work provided for assessment.
Fail 0-49 Usually awarded to students whose performance is not considered to meet the minimum requirements set for particular tasks. The fail grade may be a result of insufficient preparation, of inattention to assignment guidelines or lack of academic ability. A frequent cause of failure is lack of attention to subject or assignment guidelines.

Quality assurance

For the purposes of quality assurance, Bond University conducts an evaluation process to measure and document student assessment as evidence of the extent to which program and subject learning outcomes are achieved. Some examples of student work will be retained for potential research and quality auditing purposes only. Any student work used will be treated confidentially and no student grades will be affected.

Study information

Submission procedures

Students must check the [email protected] subject site for detailed assessment information and submission procedures.

Policy on late submission and extensions

A student who has not established a basis for an extension in compliance with University and Faculty policy either by 1) not applying before the assessment due date or 2) by having an application rejected due to failure to show a justifiable cause for an extension, will receive a penalty on assessment submitted after its due date. The penalty will be 10% of marks awarded to that assessment for every day late, with the first day counted after the required submission time has passed. No assessment will be accepted for consideration seven calendar days after the due date. Where a student has been granted an extension, the late penalty starts from the new due date and time set out in the extension.

Policy on plagiarism

University’s Academic Integrity Policy defines plagiarism as the act of misrepresenting as one’s own original work: another’s ideas, interpretations, words, or creative works; and/or one’s own previous ideas, interpretations, words, or creative work without acknowledging that it was used previously (i.e., self-plagiarism). The University considers the act of plagiarising to be a breach of the Student Conduct Code and, therefore, subject to the Discipline Regulations which provide for a range of penalties including the reduction of marks or grades, fines and suspension from the University.

Bond University utilises Originality Reporting software to inform academic integrity.

Feedback on assessment

Feedback on assessment will be provided to students within two weeks of the assessment submission due date, as per the Assessment Policy.

Disability support

If you have a disability, illness, injury or health condition that impacts your capacity to complete studies, exams or assessment tasks, it is important you let us know your special requirements, early in the semester. Students will need to make an application for support and submit it with recent, comprehensive documentation at an appointment with a Disability Officer. Students with a disability are encouraged to contact the Disability Office at the earliest possible time, to meet staff and learn about the services available to meet your specific needs. Please note that late notification or failure to disclose your disability can be to your disadvantage as the University cannot guarantee support under such circumstances.

Subject curriculum

Subject overview

Linking measurment with pricing

Basic estimating procedures

Variables affecting labour costs

Understanding the construction sequence, tolerances and inclusions to build up price rates for concrete

Understanding the construction sequence, tolerances and inclusions to build up price rates for reinforcement

Understanding the construction sequence, tolerances and inclusions to build up price rates for formwork

Introduction to virtual building and model-based documentation, collaboration and open-data environments.

Practical modelling workshops using Revit software

Detailed pricing using Rawlinsons price book

Measured quantities prepared for tendering purposes: examples and risks

Prime Cost, Provisional and Contingency costs

Performance indicators for assessment of the quality of design and documentation process

Risk attached to estimating the cost of project, how to price for risk and how risk is mitigated in construction projects

Approved on: Apr 20, 2021. Edition: 4.3
Last updated: May 4, 2021.